The TN2215 and the TN2183 analog line circuit pack is designed for international, United States and Canada for offer B only.
The TN2215 and the TN2183 provide 16 analog port interfaces. Each port supports one telephone, such as 500 (rotary dial) and 2500 telephones (DTMF dial) from a tip/ring pair. Each port also sends or receives signaling to and from a device, such as an analog telephone, answering machine, FAX and loop-start CO port. The TN2215 and the TN2183 provides rotary digit 1 recall, ground-key recall, and programmable flash timing. Additional support is provided for selectable ringing patterns, LED message waiting, and secondary lightning protection.
The TN2215 and TN2183 supports on-premises wiring with either touch tone or rotary dialing and with or without the LED message waiting indicators. The TN2215 and TN2183 supports off-premises wiring with either DTMF or rotary dialing. LED message waiting indicators are not supported off-premises. Neon message waiting indicators are not supported.
A maximum of six to eight simultaneous ringing ports is allowed depending on the ringing cadence selected. The TN2215 and the TN2183 supports A-Law and �-Law companding and administrable timers.
The TN2215 and the TN2183 also supports balanced ringing. When balanced ringing is configured for France the TN2202 ring generator circuit pack must be used.
The TN2215 and the TN2183 supports DTMF sending levels appropriate for Avaya IVR.
The TN2215 and the TN2183 is impedance and gain selectable for multiple countries. For more information, contact your Avaya representative.
The following table shows the telephones, wiring sizes and wiring ranges supported by the TN2215 and the TN2183 circuit packs.