DEFINITY Made Easy Tools
Issue 3, December 2001

Frequently Asked Questions

---

What happened to the status Communciations Interface Link for the D-Channels? How do I see the D-Channel state?

In pre-R7 systems, you could use either of two commands:

• status communications interface link


• status signaling group x

to determine whether the ISDN-PRI D-Channels are in an in-service state. The upgrade to R7 takes the system to a new architecture, and you can no longer status a link to find out if the D-Channels are up.

In R7 and later systems, you can continue to use the status signaling group x command to determine if an ISDN-PRI D-Channel is up. In addition, list sys-link now shows you which links are up.

---

Copyright© 2001 Avaya Inc.

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.