| Command: accept adv-rtr |
Configures the OSPF accept-advertisements router policy.
accept adv-rtr <A.B.C.D>
accept adv-rtr <A.B.C.D> enable
accept adv-rtr <A.B.C.D> metric-type {any | type1 | type2}
accept adv-rtr <A.B.C.D> route-policy <WORD>
no accept adv-rtr <A.B.C.D>
no accept adv-rtr <A.B.C.D> enable
default accept adv-rtr <A.B.C.D>
default accept adv-rtr <A.B.C.D> enable
default accept adv-rtr <A.B.C.D> metric-type
default accept adv-rtr <A.B.C.D> route-policy
None
OSPF Router Configuration
| Parameter | Description |
|---|---|
|
A.B.C.D | Represents the IP address of the router from which advertisements are to be accepted. The value 0.0.0.0 denotes that advertisements from all routers are accepted |
|
any | match any metric type |
|
enable | Enables the accept entry for the router specified in the <ip_address> parameter |
|
metric-type {any | type1 | type2} | Indicates the type of OSPF external routes that will be accepted from this router |
|
route-policy <WORD> | Specifies the name of a previously configured route map to be used for filtering external routes advertised by the specified advertising router before accepting them into the routing table |
|
type1 | match type-1 metric type |
|
type2 | match type-2 metric type |