fcoe profile

This command is included only for reference. Traffic profiles are automatically created on the VSP7000 switch by the FNC and do not need to be manually configured. DO NOT manually configure FCoE traffic profiles.

Syntax

fcoe profile d-id <H.H.H> port-list <port> update-dst-mac <H.H.H> update-src-mac <H.H.H> egress-port <port> [ethertype <0x0-0xFFFF>] [name <WORD>] [priority <0–7>] [s-id <H.H.H> ] [vlan-min <1–4094> vlan-max <1–4094>]
default fcoe [profile]
no fcoe profile [<1-55000>]
fcoe profile d-id <H.H.H> port-list <port> update-dst-mac <H.H.H> update-src-mac <H.H.H> egress-trunk <1-64> [ethertype <0x0-0xFFFF>] [name <WORD>] [priority <0–7>] [s-id <H.H.H> ] [vlan-min <1–4094> vlan-max <1–4094>]

Default

None

Command mode

Global Configuration

Command parameters

Parameter	Description
<1-55000>	Specifies the FCoE profile ID.
d-id <H.H.H>	Specifies the three-octet Fiber Channel Destination ID (D_ID) value for performing stream identification.
egress-port <port>	Specifies the egress port.
egress-trunk <1-64>	Specifies the egress trunk.
ethertype <0x0-0xFFFF>	Specifies the ethertype match criteria. The default is 0x8906.
name <WORD>	Specifies the entry label data.
port-list <port>	Specifies the ingress port-list criteria.
priority <0–7>	Specifies the user priority match criteria. The default is ignore.
s-id <H.H.H>	Specifies the Fiber Channel Source ID (S_ID) for performing stream identification. The default is ignore.
update-dst-mac <H.H.H>	Specifies the non-zero six-octet update action destination MAC address.
update-src-mac <H.H.H>	Specifies the six-octet update action source MAC address.
vlan-min <1–4094> vlan-max <1–4094>	Specifies the minimum and maximum VLAN ID match criteria.