| Command: ipv6 interface |
Creates and configure vlan IPv6 interface.
ipv6 interface [address <ipv6_address>] [enable] [link-local <WORD>] [mtu <1280-9216>] [name <WORD>] [reachable-time <0-3600000>] [retransmit-timer <0-3600000>]
default ipv6 interface [all] [enable] [link-local] [mtu] [reachable-time] [retransmit-timer]
no ipv6 interface [address <ipv6_address>] [all] [enable]
None
VLAN Interface Configuration
| Parameter | Description |
|---|---|
|
address <ipv6 address> | Specifies the IPv6 address to assign to the interface. |
|
all | Adminstratively disables the management VLAN IPv6 interface and deletes the IPv6 address previously assigned to the interface. |
|
enable | Enables interface admin status. |
|
link-local <WORD> | Specifies an IPv6 address identifier for the local link, with a maximum of 19 characters. |
|
mtu <1280-9216> | Configures the maximum transmission unit for the interface. The default value is 1500. |
|
name <WORD> | Specifies a unique alphanumeric name for the interface, with a maximum of 255 characters. |
|
reachable-time <0-3600000> | Configures the time, in milliseconds, that an IPv6 neighbor is considered reachable after receiving a reachability confirmation. Range is 0-3600000. The default value is 30000. |
|
retransmit-timer <0-3600000> | Configures the time, in milliseconds, between retransmissions of neighbor solicitation messages to a neighbor when resolving the address or when probing the reachability of an IPv6 neighbor. The default value is 1000. |