| Command: ipv6 nd (VLAN Interface Configuration) |
Configure neighbor discovery parameters on a VLAN.
ipv6 nd [dad-ns <0-600>][hop-limit <1-255>][managed-config-flag][other-config-flag][ra-lifetime <0-9000>][rtr-advert-max-interval <4-1000>][rtr-advert-min-interval <3-1350>][send-ra]
default ipv6 nd [dad-ns][hop-limit][managed-config-flag][other-config-flag][ra-lifetime][rtr-advert-max-interval ][rtr-advert-min-interval][send-ra]
no ipv6 nd [managed-config-flag][other-config-flag][send-ra]
None
VLAN Interface Configuration
| Parameter | Description |
|---|---|
|
dad-ns <0-600> | Configure the number of neighbor solicitation packets sent during duplicate address detection. |
|
hop-limit <1-255> | Configure number of hops before packets are dropped. |
|
managed-config-flag | Enables M-bit (managed address configuration) on the router. Use the no operator to remove this option. Default is false. |
|
other-config-flag | Enables the O-bit (other stateful configuration) in the router advertisement (autoconfigures received information without addresses). Use the no operator to remove this option. Default is false. |
|
ra-lifetime <0-9000> | Configures the router lifetime included in router advertisement. Other devices use this information to determine if they can reach the router. Default is 1800. |
|
rtr-advert-max-interval <4-1000> | Configures the maximum time allowed between sending unsolicited multicast router advertisements. Default is 600. |
|
rtr-advert-min-interval <3-1350> | Configures the minimum time allowed (in seconds) between sending unsolicited multicast router advertisements from the interface. Default is 200. |
|
send-ra | Enables or disables periodic router advertisement messages. Use the no operator to remove this option. Default is true. |