| Command: ipv6 route |
Creates and configures an IPv6 static route.
ipv6 route <WORD> cost <1-65535> [enable]
ipv6 route <WORD> mgmt [enable]
ipv6 route <WORD> next-hop <WORD> [enable]
ipv6 route <WORD> preference <1-255> [enable]
ipv6 route <WORD> tunnel <1-2147483647> [enable]
ipv6 route <WORD> vlan <1-4094> [enable]
default ipv6 route <WORD> [cost] [enable] [mgmt] [next-hop <WORD>] [preference] [tunnel <1-2147483647>] [vlan <1-4094>]
no ipv6 route <WORD> mgmt [enable]
no ipv6 route <WORD> next-hop <WORD> [enable]
no ipv6 route <WORD> tunnel <1-2147483647 [enable]
no ipv6 route <WORD> vlan <1-4094> [enable]
None
Global Configuration
| Parameter | Description |
|---|---|
|
<WORD> | Specifies the IPv6 address. |
|
cost <1-65535> | Specifies the route cost or distance ratio to reach the destination for this node. The default is 1. |
|
enable | Enables the route. |
|
mgmt | Designates the route for out-of-band management. |
|
next-hop <WORD> | Configures the next-hop for the route. |
|
preference<1-255> | Specifies the route preference of the destination IPv6 address. The default is 5. |
|
tunnel <1-2147483647> | Specifies a tunnel ID. |
|
vlan <1-4094> | Specifies a VLAN ID. |