lacp port-mode

Configures LACP port mode.

Syntax

lacp port-mode advance
lacp port-mode default
default lacp port-mode

Default

Command mode

Global Configuration

Command parameters

Parameter	Description
advance	Specifies advance mode for LACP–enabled switch ports. In advance mode, when a local switch port has LACP enabled and STP disabled, and the port is connected to non-LACP partner port, if the link with the partner fails, the local LACP–enabled port remains in the Blocking state. In advance mode, when a local LACP– enabled switch port is removed from a trunk configuration because LACP is disabled on the link partner, or PDU reception times out, the local LACP–enabled port remains in the Blocking state.
default	Specifies default mode for LACP–enabled switch ports. In default mode, when a local LACP– enabled switch port is connected to a non-LACP partner port, and the link to the partner fails to converge, the LACP–enabled port state changes to Forwarding. In default mode, when a local LACP–enabled switch port is removed from a trunk configuration because LACP is disabled on the link partner, or PDU reception times out, the local LACP–enabled port functions as a standalone port. The port state is determined by STP, if STP is enabled, or by Forwarding if STP is disabled.

Parameter

Description

advance

Specifies advance mode for LACP–enabled switch ports. In advance mode, when a local switch port has LACP enabled and STP disabled, and the port is connected to non-LACP partner port, if the link with the partner fails, the local LACP–enabled port remains in the Blocking state. In advance mode, when a local LACP– enabled switch port is removed from a trunk configuration because LACP is disabled on the link partner, or PDU reception times out, the local LACP–enabled port remains in the Blocking state.

default

Specifies default mode for LACP–enabled switch ports. In default mode, when a local LACP– enabled switch port is connected to a non-LACP partner port, and the link to the partner fails to converge, the LACP–enabled port state changes to Forwarding. In default mode, when a local LACP–enabled switch port is removed from a trunk configuration because LACP is disabled on the link partner, or PDU reception times out, the local LACP–enabled port functions as a standalone port. The port state is determined by STP, if STP is enabled, or by Forwarding if STP is disabled.