| Command: lldp med-network-policies |
Configures LLDP Media Endpoint Devices (MED) policies for switch ports.
lldp med-network-policies [port <port>] {voice | voice-signalling} dscp <0-63>
lldp med-network-policies [port <port>] {voice | voice-signalling} priority <0-7>
lldp med-network-policies [port <port>] {voice | voice-signalling} tagging {tagged | untagged }
lldp med-network-policies [port <port>] {voice | voice-signalling} vlan-id <0-4094>
default lldp med-network-policies [port <port>] {voice | voice-signalling}
no lldp med-network-policies [port <port>] {voice | voice-signalling}
None
Ethernet Interface Configuration
| Parameter | Description |
|---|---|
|
dscp <0-63> | Specifies the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 that is associated with the selected switch port or ports. Values range from 0–63. The default value is 46. |
|
port <port> | Specifies the port or ports on which to configure LLDP MED policies |
|
priority <0-7> | Specifies the value of the 802.1p priority that applies to the selected switch port or ports. Values range from 0–7. The default value is 6 |
|
tagging {tagged | untagged} | Specifies the type of VLAN tagging to apply on the selected switch port or ports. tagged—uses a tagged VLAN. untagged—uses an untagged VLAN or does not support port-based VLANs. If you select untagged, the system ignores the VLAN ID and priority values, and recognizes only the DSCP value. |
|
vlan-id <0-4094> | Specifies the VLAN identifier for the selected port or ports. Values range from 0–4094 (0 is for priority tagged frames). If you select priority tagged frames, the system recognizes only the 802.1p priority level and uses a value of 0 for the VLAN ID of the ingress port. |
|
voice | Specifies voice network policy. The default value is 46. |
|
voice-signaling | Specifies voice signalling network policy. |