| Command: lldp tx-tlv |
Sets the optional Management TLVs to be included in the transmitted LLDPDUs.
[default] [no] lldp tx-tlv [port <port>] local-mgmt-addr
[default] [no] lldp tx-tlv [port <port>] med {extendedPSE | inventory | location | med-capabilities | network-policy}
[default] [no] lldp tx-tlv [port <port>] port-desc
[default] [no] lldp tx-tlv [port <port>] sys-cap
[default] [no] lldp tx-tlv [port <port>] sys-desc
[default] [no] lldp tx-tlv [port <port>] sys-name
[default] [no] lldp tx-tlv [port <port>] vendor-specific avaya {call-server | dot1q-framing | file-server |poe-conservation}
None
Ethernet Interface Configuration
| Parameter | Description |
|---|---|
|
call-server | Enables the call server TLV transmit flag. |
|
dot1q-framing | Enables the Layer 2 priority tagging TLV transmit flag. |
|
file-server | Enables the file server TLV transmit flag. |
|
local-mgmt-addr | Specifies the local management address TLV. This TLV is enabled by default. |
|
med location | Specifies the location TLV. The default is enabled. |
|
med med-capabilities | Specifies the MED capabilities TLV. The default is enabled. |
|
med extendedPSE | Specifies the extended PSE TLV. The default is disabled. |
|
med inventory | Specifies the inventory TLV. The default is enabled. |
|
med network-policy | Specifies the network policy TLV. The default is enabled. |
|
poe-conservation | Enables the PoE conservation request TLV transmit flag. |
|
port <port> | Specifies a port or list of ports. |
|
port-desc | Specifies the port description TLV This TLV is enabled by default. This TLV is enabled by default. |
|
sys-cap | Specifies the system capabilities TLV. |
|
sys-desc | Specifies the system description TLV. This TLV is enabled by default. |
|
sys-name | Specifies the system name TLV. This TLV is enabled by default. |