| Command: ntp server |
Add an IP address for a Network Time Protocol (NTP) server or modify existing NTP server parameters. You can configure a maximum of 10 time servers.
default ntp server {A.B.C.D} [auth-enable] [authentication-key]
default ntp server {A.B.C.D} [enable]
no ntp server {A.B.C.D} [auth-enable]
no ntp server {A.B.C.D} [enable]
ntp server {A.B.C.D} [auth-enable] [authentication-key <1-2147483647>]
ntp server {A.B.C.D} [enable]
Does not use MD5 authentication
Global Configuration
| Parameter | Description |
|---|---|
|
{A.B.C.D} | Specifies the IP address of the Network Time Protocol (NTP) server to add or modify. |
|
auth-enable | Activates MD5 authentication on this Network Time Protocol (NTP) server. |
|
authentication-key <1-2147483647> | Specifies the key ID value used to generate the MD5 digest for the Network Time Protocol (NTP) server. The default authentication key is 0, which indicates disabled authentication. |
|
enable | Activates the Network Time Protocol (NTP) server. |