Command: qos ip-element

Home | Command modes | Alphabetical listing

qos ip-element

Adds and configures classifier entries.

Syntax

Default

None

Command mode

Global Configuration

Command parameters

ParameterDescription

<1-55000>

Specifies the element ID.

addr-type <ipv4 | ipv6>

Specifies the address type. Use the value ipv4 to indicate an IPv4 address or, on switches that support IPv6, the value ipv6 to indicate an IPv6 address. The default is ipv4.

ds-field <0-63>

Specifies a 6-bit DSCP value. The default is ignore.

dst-ip <A.B.C.D/0-32>

Specifies the destination IP address and mask in the form of a.b.c.d/x for IPv4, or, on switches that support IPv6, x:x:x:x:x:x:x:x/z .

dst-port-min <0-65535> dst-port-max <0-65535>

Specifies the Layer 4 destination port minimum and maximum value.

ip-flag <flag>

Specifies the flags present in an IPv4 header.

ipv4-option <no-opt | with-opt>

Specifies whether the Option field is present in the packet header.

name <WORD>

Specifies the name of the IP element.

protocol <0-255>

Specifies the IPv4 protocol classifer criterial.

session-id <1-4294967295>

Specifies the session ID.

src-ip <A.B.C.D/0-32>

Specifies the source IP address and mask in the form of a.b.c.d/x for IPv4, or, on switches that support IPv6, x:x:x:x:x:x:x:x/z.

src-port-min <0-65535> src-port-max <0-65535>

Specifies the Layer 4 source port minimum and maximum value.

tcp-control <flags>

Specifies the control flags present in an TCP header.