| Command: rate-limit |
Configures rate-limiting on the port.
rate-limit [port <port>] <both <0-10> | percent <0-10> | pps <0-262143>
no rate-limit [port <port>]
default rate-limit [port <port>]
rate-limit [port <port>] <broadcast <0-10> | percent <0-10> | pps <0-262143>
rate-limit [port <port>] <multicast <0-10> | percent <0-10> | pps <0-262143>
None
Ethernet Interface Configuration
| Parameter | Description |
|---|---|
|
<both <0-10> | percent <0-10> | pps <0-262143> | Apply rate-limiting to both multicast and broadcast. Enter an integer from 1–10 to set the rate-limiting percentage or configure the packets-per-second. |
|
<broadcast <0-10> | percent <0-10> | pps <0-262143> | Apply rate-limiting to broadcast packets. Enter an integer from 1–10 to set the rate-limiting percentage or configure the packets-per-second. |
|
<multicast <0-10> | percent <0-10> | pps <0-262143> | Apply rate-limiting to multicast packets. Enter an integer from 1–10 to set the rate-limiting percentage or configure the packets-per-second. |
|
port <port> | Specify the port numbers to configure for rate-limiting. Enter the port numbers to configure. If you omit this parameter, the system uses the port number you specified to enter the interface command mode. |