| Command: slamon RTP |
Executes a real time protocol (RTP) test on the network to establish the QoS benchmark.
slamon RTP {A.B.C.D} <0-63>
slamon RTP {A.B.C.D} <0-63> npack <10-100>
slamon RTP {A.B.C.D} <0-63> nsync <10-100>
slamon RTP {A.B.C.D} <0-63> period <1000-200000>
slamon RTP {A.B.C.D} <0-63> npack <10-100> nsync <10-100> period <1000-200000>
None
Application Configuration
| Parameter | Description |
|---|---|
|
<0-63> | Specifies the DSCP value for use in packets that are generated by the RTP test. |
|
<A.B.C.D> | Specifies the destination IP address. If no IP address is specified, the test execution fails. |
|
npack <10-100> | Specifies the RTP npack value. The default value is 50. |
|
nsync <10-100> | Specifies the RTP nsync value. The default value is 10. |
|
period <1000-200000> | Specifies the interval between packets in microseconds, generated by the RTP test. The default interval is 20000 microseconds. |