| Command: slpp-guard (Ethernet Interface Configuration) |
Configures SLPP Guard for switch ports.
slpp-guard port <port> enable [timeout {0 | <10-65535>}]
no slpp-guard [port <port>] [enable] [timeout]
default slpp-guard [port <port>] [enable] [timeout]
None
Ethernet Interface Configuration
| Parameter | Description |
|---|---|
|
enable | Enables SLPP Guard parameters for a port or list of ports. |
|
port <port> | Specifies the port or list of ports on which the specified SLPP Guard parameter or parameters are configured |
|
timeout {0 | <10-65535>} | Specifies the time period, in seconds, for which SLPP Guard disables the port. After the timeout period expires, the switch re-enables the port. The timeout value can be 0 or a value ranging from 10 to 65535. With a value of 0, the port remains disabled until it is manually re-enabled. The default timeout value is 60 seconds. |