| Command: slpp (Ethernet Interface Configuration) |
Enable Simple Loop Prevention Protocol (SLPP) by port to detect a loop and automatically stop it.
slpp [port <port>] enable [packet-rx-threshold <1-500>]
slpp [port <port>] packet-rx-threshold <1-500>
default slpp [enable] [packet-rx-threshold] [port <port>]
no slpp [enable] [port <port>]
Disabled
Ethernet Interface Configuration
| Parameter | Description |
|---|---|
|
enable | Enables or disables SLPP packet reception on the port. The default is disabled. |
|
packet-rx-threshold <1-500> | Specifies the SLPP reception threshold on the ports, expressed as an integer. The packet reception threshold specifies the number of SLPP packets the port receives before it is administratively disabled. The default is 5. |
|
port <port> | Specify the port or list of ports. |