| Command: slpp (Global Configuration) |
Configures SLPP globally.
slpp enable
slpp ethertype <0x0600-0xffff>
slpp timeout <0 | 1-65535>
slpp tx-interval <500-5000>
slpp vid <WORD>
default slpp [enable] [ethertype] [timeout] [tx-interval] [vid]
no slpp [enable] [timeout] [vid <WORD>]
None
Global Configuration
| Parameter | Description |
|---|---|
|
enable | Enables SLPP globally. The default is disabled. |
|
ethertype <0x0600-0xffff> | Configures the SLPP PDU ethertype value. You cannot set the SLPP ethertype value to an ethertype value reserved for common protocols, such as LLDP, ARP, and IPv6. The default is 0x8102. |
|
timeout <0 | 1-65535> | Configures the auto enable timer for ports shut down by SLPP. If the value is set to 0, ports shut down by SLPP remain disabled until manually re enabled. The default is disabled. |
|
tx-interval <500-5000> | Configures the SLPP PDU transmit interval. The default is 500. |
|
vid <VLAN ID> | Adds a VLAN to the SLPP transmitting list. |