| Command: spbm (ISIS Router Configuration) |
Creates the SPBM instance.
spbm <1-100>
no spbm <1-100>
default spbm <1-100>
spbm <1-100> b-vid {<vlan-id> [-<vlan-id>][,...]} [primary <1-4094>]
no spbm <1-100> b-vid {<vlan-id> [-<vlan-id>][,...]}
None
ISIS Router Configuration
| Parameter | Description |
|---|---|
|
<1-100> | Creates the SPBM instance. In this release, only one SPBM instance is supported |
|
b-vid {<vlan-id> [-<vlan-id>] [,...]} | Sets the ISIS SPBM instance data VLANs. Use the no option to remove the specified BVLAN from the SPBM instance. |
|
lsdb-trap enable | Enables a trap when the SPBM LSDB changes. |
|
nick-name <x.xx.xx> | Specifies a nickname for the SPBM instance globally. The value is 2.5 bytes in the format <x.xx.xx>. Use the no or default options to delete the configured nickname. |
|
smlt-peer-system-id | Specifies the IS-IS SPBM peer system ID. The ID is part of the required configuration. You must configure the SMLT peer system ID as the nodal MAC of the peer device. In the IS-IS network, the nodal MAC of devices should be eight apart from each other. |
|
smlt-virtual-bmac | Specifies a virtual MAC address used by both peers. SMLT virtual B-MAC is an optional configuration. |