| Command: telnet-access |
Configures Telnet access to the switch using ACLI.
telnet-access disable
telnet-access enable
telnet-access inactive-timeout <0-60>
telnet-access logging {none | access | failures | all}
telnet-access login-timeout <1-10>
telnet-access retry <1-100>
telnet-access source-ip <1-50> <A.B.C.D> | <51-100> <WORD>
default telnet-access
no telnet-access [source-ip <1-50> | <51-100>]
None
Global Configuration
| Parameter | Description |
|---|---|
|
disable | Disables Telnet access to the switch. |
|
enable | Enables Telnet access to the switch. |
|
inactive-timeout <0-60> | Specifies, in minutes, the duration for an inactive session to be terminated. Values range from 0 to 60. The default is 15 minutes. |
|
logging {none | access | failures | all} | Specifies the events for which to log details. The default is all. |
|
login-timeout <1-10> | Specifies the time, in minutes, to wait for Telnet and Console login before the connection closes. The default is 1 minute. |
|
retry <1-100> | Specifies the number of times the user can enter an incorrect password before closing the connection. Values range from 1 to 100. The default is 3. |
|
source-ip <1-50> <51-100> <A.B.C.D> <WORD> | Specifies the source IP address from which connections are allowed. |