Welcome to Quality Monitoring 10.1.2 Update 480

Client JREs are listed as either Active or Compatible; all other versions are not supported. The versions listed as Active are those currently fully tested for the specified release.

Although JRE versions listed as Compatible might also be tested, this testing may be limited or support may be based on backward-compatibility statements. Older versions of JRE versions may transition over time from Active to Compatible as new releases become available.

While all Active and Compatible versions are supported, non-Active versions may impact resolution times. In the unlikely event that a JRE issue does arise on a Compatible version, resolution may require upgrade to an Active version.

The updated Client JREs list is as follows:

Java Environment	Support
JRE 7 Update 00	Active
JRE 7 Update 02	Active
JRE 7 Update 03	Active
JRE 7 Update x See NOTES below	Compatible

JRE 6 Update 6	Active
JRE 6 Update 7	Active
JRE 6 Update 12	Active
JRE 6 Update 13	Active
JRE 6 Update 14	Active
JRE 6 Update 16	Active
JRE 6 Update 18	Active
JRE 6 Update 21	Active
JRE 6 Update 22	Active
JRE 6 Update 24	Active
JRE 6 Update 26	Active
JRE 6 Update 27	Active
JRE 6 Update 29	Active
JRE 6 Update 30	Active
JRE 6 Update x See NOTES below	Compatible

JRE 5.0 Update 12	Active
JRE 5.0 Update 16	Active
JRE 5.0 Update 17	Active
JRE 5.0 Update 18	Active
JRE 5.0 Update 20	Active
JRE 5.0 Update 22	Active
JRE 5.0 Update x See NOTES below	Compatible

JRE 1.4.2_18	Active
JRE 1.4.2_19	Active
JRE 1.4.2_* See NOTES below	Compatible
JRE 1.4.2_12	Not Supported

NOTES:

� Daylight Saving Time (DST): To support the US DST changes that took place in 2007, the JRE versions 1.4.2_11 and above or 1.5.0_6 and above are required.

� Static Versioning: Static Versioning started with JRE 5.0 update 6. If you install JRE 5.0 update 6 or above on the client computers, all applets are forced to use this version of the JRE; the usage of clsids to launch specific versions of the JRE (Static Versioning) is disabled. With JRE 5.0 update 6, on the Windows platform, any requests from any applet to execute with an earlier JRE version are automatically redirected to JRE 5.0 update 6. If any software on the client workstation requires the use of other JRE versions, this feature may prevent those applets from executing correctly.

You can override this feature by creating new registry keys on each workstation:

[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy]

and creating a new DWORD value:

"EnableSecureStaticVersioning"=dword:00000000

� Security Baselines: Static Versioning has been replaced with Security Baselines as of JRE 6.0 Update 11. When JRE 6.0 Update 11 and above receives an HTML request to execute a lower version of the JRE, it asks the user whether or not to execute the lower version. If the user selects �Run�, the JRE requested is used to execute the applet. If the user selects �Cancel�, the latest version of JRE 6.0 Update 11 and above is used to execute the applet.

However, the dialog is not presented to the user when the JRE requested to execute the applet is the latest in the JRE Family. Each JRE Family has a version that serves as the Security Baseline. It is usually the latest JRE released for the family. As later versions of JRE 6.0 are released, the Family Security Baseline changes to the latest JRE of the version family. If the Security Baseline JRE is requested to execute the applet, JRE 6.0 Update 11 and above will not display the dialog. It will allow that version of the JRE to execute the applet. The JRE Families that are compatible with Quality Monitoring are 1.4.2_XX, 1.5.0_XX, 1.6.0_XX, and 1.7.0_XX.

Top of Page

Install the Update

The update must be installed by a user with Administrator privileges.

Before installing the update, make sure that Quality Monitoring 10.1.2 application has been installed on a server and is operating normally. Also, make sure the Quality Monitoring Database has been setup.

To install the update:

1 Suspend use of the Quality Monitoring system until you update all Quality Monitoring servers.

NOTE: If you cancel the update before it completes normally, you may have to restart services manually.

2 If you plan use the D/82JCT-U voice card, you must update the Dialogic Driver to version 6.0 Service Update 261. For detailed instructions, see the Quality Monitoring Installation Guide.

NOTE: Obtain Dialogic Driver version 6.0 Service Update 261 for Windows 2003 and Windows 2008 from your designated download site, or by contacting Verint Support.

3 On the database server, backup your database. For detailed instructions, see the Quality Monitoring Upgrade Guide.

4 From the update media, copy the following folder applicable to your database server platform to the database server:

Microsoft SQL Server:\database\MS SQL Server\Database\Patch
Oracle: \database\Oracle\Schema\Patch

5 Run the following command file for both Microsoft SQL Server and Oracle:

ApplyCHF.cmd

NOTE:
For Microsoft SQL Server the scripts will prompt for Database Server Name, Database Server Port, User Name, User Password, and Database Name.
For Oracle the scripts will prompt for TNS Service Name, User Name, and User Password.
The User Name must have Database Server System Administrator level privileges.

6 On the Quality Monitoring server, run setup.exe to install the Hot Fix Rollup for Quality Monitoring 10.1.2.

Setup.exe launches the MSI package, which will detect the current Quality Monitoring version. If the current version is Quality Monitoring 10.1.2, a message appears asking you to confirm the update.

NOTE: If you install the update on Windows Server 2008 R2, use the "Run As Administrator" option to install the update. To use this option, right click setup.exe and then select Run As Administrator.

NOTE: If the current version is not Quality Monitoring 10.1.2, a message will display to inform you that the installation cannot continue. The installation stops when you click OK.

7 To begin the update, select Install.

The MSI package will detect the current components and start the update. When the update completes, a prompt will display to inform you the server must be restarted.

8 Select Yes to restart the server.

9 After the server restarts, manually start any Quality Monitoring services that are not set to start automatically. For complete services information, see the Quality Monitoring Installation Guide.

When all servers have been updated, resume using the Quality Monitoring system with the update.

To update Supervisor:

1 On the supervisor machine, use the operating system control panel to open the Add/Remove Programs tool.

2 Remove the supervisor software.

3 Install the supervisor software from the Quality Monitoring Update.

For more information, see the Quality Monitoring Installation Guide.

Top of Page

Remove the Update

A user with Administrator privileges can remove the update and roll back the Quality Monitoring system. Removing the update restores the system to the GA Version of Quality Monitoring 10.1.2.

Before removing the update, make sure that Quality Monitoring 10.1.2 Update has been installed on a server. Also, make sure the Quality Monitoring Database has been setup.

To remove the update:

1 Suspend use of the Quality Monitoring system until you remove the update from all Quality Monitoring servers.

2 On the database server, run the rollback database script that came with the update: From the update media, copy the following folder applicable to your database server platform to the database server:

Microsoft SQL Server:\database\MS SQL Server\Database\Patch
Oracle: \database\Oracle\Schema\Patch

3 Run the following command file for both Microsoft SQL Server and Oracle:

RollbackCHF.cmd

NOTE:
For Microsoft SQL Server the scripts will prompt for Database Server Name, Database Server Port, User Name, User Password, and Database Name.
For Oracle the scripts will prompt for TNS Service Name, User Name, and User Password.
The User Name must have Database Server System Administrator level privileges.

4 On the Quality Monitoring server, open the Add/Remove Program section of the Control Panel for the operating system.

For Windows 2008 open Programs and Features section of the Control Panel for the operating System.

5 Select Quality Monitoring Update from the list.

6 Click Remove. A confirmation message displays.

For Windows 2008 open right click and select Uninstall. A confirmation message displays.

7 Click Yes to confirm the removal of the update.

The updated modules will be removed and the system will revert to the previous release. When the uninstall completes, a prompt will display to inform you the server must be restarted.

8 Select Yes to restart the server.

9 After the server restarts, manually start any Quality Monitoring services that are not set to start automatically. For complete services information, see the Quality Monitoring Installation Guide.

When all servers have reverted to the previous release, resume using the Quality Monitoring system.

To remove a Supervisor update:

1 On the supervisor machine, use the operating system control panel to open the Add/Remove Programs tool.

2 Remove the supervisor software.

3 Install the previous version of the supervisor software from the older Quality Monitoring Update or the Quality Monitoring DVD.

Top of Page

Identify the Version

To verify which release or service pack you have, do one of the following:

� Click About on the Login window

� Open Add/Remove Programs from the Control Panel.
The main installation is called Quality Monitoring; the updated version is called Quality Monitoring Update. The identifier for this release is Quality Monitoring HFR003
Click the Click here for support information link. The Version should match the installed version.

NOTE: For Windows 2008, open Programs and Features from the Control Panel, locate the Screen Capture Language Package, and check the Version column.

Top of Page

New Features

Feature	Description
Update 480
JRE Settings Preserved in System Administration	System Administration�s JRE configuration and settings are preserved during an update. Any additions or deletions made for JREs will remain after applying the update. In previous versions, the JRE settings reverted to the default configuration and settings.
Updates to Support Traditional Chinese	This update provides support for Traditional Chinese. This support is provided for Channel Partners.
Spell Check Functionality Disabled for Some Languages	Spell checking is disabled for some languages as they are not supported by 3^rd party tools. The following languages are affected: � Simplified Chinese � Traditional Chinese � Japanese � Korean � Russian
Update 320
Avaya Proactive Contact v5.0	Added support for Avaya Proactive Contact v5.0.
Optimized Contact Searching for Large Databases	Search was optimized to improve response times when searching for contacts on large databases.

Top of Page

Fixed Issues

� Update 480 Fixed Issues

� Update 401 Fixed Issues

� Update 320 Fixed Issues

Top of Page

Update 480 Fixed Issues

� ESR Fixed Issues

� QA Fixed Issues

� QC Fixed Issues

Back to Fixed Issues

Update 480 ESR Issues

Issue #	Description
2417828	Missing audio at the end of a call.
2926878	Evaluations created off a form are showing zero score after the form is saved and opened.
3087374	BDR crashing on contact export because USER_ATTR record is too large.
3094170	Cannot add older JREs to System Administration.

Update 480 QA Issues

Issue #	Description
87165	Add a message to the event log that would say that the audio service finished initialization and is ready to work.
101587	TSAPI Adapter - Need a message in Event Viewer when the adapter starts up.
102629	Handling LMPS socket (SSL) self-shutdown.
103836	AVI files are not deleted from the exports directory.
103846	Capture installation on Windows 2003 32-bit incorrectly modifies a registry value.
103989	Unable to search for Custom Attributes in Contacts.
104026	Custom Column Dialog widened to better display long Custom Attributes do to SIS.
104079	Applying HFR002 replaces IE5, IE5S and Appscreen which breaks custom Java configurations.
104197	Unable to Live Monitor an Agent after replaying Contacts.
104291	Screen Resolution of an Agent's PC caused problems replaying the Agent's calls.

Update 480 QC Issues

Issue #	Description
99574	Login Screen is vulnerable to Cross-Site Request Forgery (XSRF).

Back to Fixed Issues

Update 401 Fixed Issues

� ESR Fixed Issues

� QA Fixed Issues

� QC Fixed Issues

Back to Fixed Issues

Update 401 ESR Issues

Issue #	Description
2664576	BDR crashes when eRecorder runs out of drive space.
2677128	Number of unique WorkSpaces Recorded in last 30 days.
2693082	Command service crashing.

Update 401 QA Issues

Issue #	Description
88062	Randomizer rules don't work properly.
101429	When attempting to modify a schedule-based rule, error 1073 results.
102944	Connections between WFM and QM78 are not functioning properly.
102951	When viewing an Evaluation from WFM a URL error 500 is received.
103013	Command service stops when users are added to a contact folder.
103138	Java security warning is displayed when launching Mini-Player.
103146	OEM - AIM recording has blank audio.
103194	Request to delete randomizer templates when agents status changes to inactive.
103294	Media channels do not initialize when the eRecorder server name exceeds 40 characters.
103515	When reviewing a contact that has event data on the left, the next and previous buttons are not working.
103568	The display of evaluation forms included only partial information for some users.
103570	After removing JRE from JRE settings, unable to access System Admin in QM.
103683	QM - Job Verint_Maintenance_Daily_ReIndexes error.

Update 401 QC Issues

Issue #	Description
90191	Support for KMS on Win 2008 64-bit.
91672	eRecorder threads may hang when exporting contacts if the export drive runs out of disk space.
92433	Performance Enhancement for Sorting in Active Agent Display
93544	Intermittently, the eRecorder Audio service cannot be stopped properly.
94674	Add new setting in Sys Admin to toggle Evaluation Agent Name change when a Contact is added to an Evaluation
94675	Need a setting to toggle whether to remove Randomize Template and Groups associations when an Agent's status is set to inactive.

Back to Fixed Issues

Update 320 Fixed Issues

� ESR Fixed Issues

� QA Fixed Issues

� QC Fixed Issues

Back to Fixed Issues

Update 320 ESR Fixed Issues

Issue #	Description
2435558	Exception in eRecorder service when exporting a contact.
2443180	Active Agent Display crashes Command Service.
2444614	Attributes tab takes 30+ seconds to populate - appears to be a database issue regarding Quality Monitoring 7.8.2_526 HF005_02.
2454986	Tomcat Crash during the same time the BDR crashed.
2462048	IFConnector adapter fails in RecorderControlProtocol.dll.
2527390	Playback error in Quality Monitoring after applying hotfix rollup 5_04.
2563656	Client States that when agents save evaluation the system hangs randomly; when system is restored, they have up to 10 evaluations created with same name and score but different contacts.

Update 320 QA Fixed Issues

Issue #	Description
99099	PCI vulnerability findings in Quality Monitoring 2010 Q2.
100387	Port-back from V11.1 SP0 - Capture Service (of Screen Capture module) is sending login/logout for empty user when the user is logged out/in from the PC.
100691	Long calls in Quality Monitoring caused by IFAdapter.
101757	ContactStore.INUM_voice search returns no results.
101792	Active Agents performance issue 1.
101825	Quality Monitoring Watchdog process running on BDR and will not stop.
101831	Not getting the Aspect Agent ID in the correct field - UseHSExtAsID custom function.
101844	Need Service Observe by Extension in the Aspect Switch configuration.
101904	Issue with business rule configuration to record advisors� calls.
102064	Divide By Zero issue at export.
102071	Issue with forms populating under new upgrade.
102125	Audio playback media selection issue.
102207	IF Connector adapter closes connection to IS.
102214	When trying to record or CapTest Citrix agent, they get the pop-up however all we receive is a white screen.
102264	Quality Monitoring BDR performance very slow after HF05_2 was applied.
102276	Avaya PDS Dialer 4.2 - Random failed logons and missing data.
102520	Search for contacts by agent last name stops at 95% when using any ID but eadmin.
102744	Unable to access Quality Monitoring.
102867	Quality Monitoring Issues with tagging custom property in Dialer Adapter using Concerto Ensemble / Unison (Davox) Adapter.
102980	The evaluation comments are missing for all evaluations done in the 7.7 (pre upgrade time period). All comment fields are now displaying "COMMENTS" instead of their original text.
103023	Contacts being marked as calibrated.
103125	SA Password with Special Characters � CHF.

Update 320 QC Fixed Issues

Issue #	Description
75774	783 Portforward: AIMTray.exe logon issue.
79285	Dialogic D/82JCT-U card on Microsoft Windows Server 2008.
80747	Auditing is inserting a NULL in the Audit_Logging Table.
81313	WCapW32 is not always using the Quality settings sent from Recorder.
82309	Email Client will not load with JRE 6.0 Update 24.
83060	Change the Legal Text for Avaya from the localized language to English.

Back to Fixed Issues

Known Limitations, Issues or Workarounds Relative to this Update

The known issues and workarounds below may have already been corrected in a software update. Please see the latest available Hot Fixes and Patches for this release and the associated Readme or Release Note documents.

Issue

Description

HFR3 Rollback Can Result in Issues with Search

This issue is due to a change made to support localization. The issue only occurs if you execute the following sequence:

1 Install HFR003.

2 Save a search.

3 Roll back the system to a previous release.

There is no solution or workaround for this issue.

QM 10.1.2 - Search for Custom Attributes on Oracle Does Not Display the Attribute Value

To solve this issue, apply the Development Patch QM_7.8.3_10.1.2_DP009.

DISCLAIMER: Please read before your installation. Only you, a Verint Systems technician or authorized Verint Systems partner trained to install this Verint Systems software should install this software. In the event you decide to install this software, before installing you should read the instructions included in the readme file (or other documentation), and contact your local Verint Systems' Support Center or authorized Verint Systems partner with any questions. In the event you do not follow our instructions on installation, or installation is not performed by a Verint Systems authorized individual, Verint Systems may, in addition to any subscription support fees paid by you, charge you additional fees to correct those errors.

Top of Page