INIT007

Alarm level

Major.

Description

The identified card has been re-assigned to the unassigned protocol. The reason for the reassignment is indicated in the reason field of the message. The card should be re-administered.

Repair procedure

Note:
When the message specifies that the packfile does not exist, either the protocol that provides this packfile is no longer installed on the system, or the rate of the card has been changed and no such protocol exists for this card.

If the reason is Packfile <packfile name> does not exist, take the following actions:

1. Log in as root.
2. Enter display card card_number to determine the protocol assigned to the indicated card and the card rate.

Use the card number indicated in the message.

3. Enter pgkinfo to determine whether the package that provides that protocol is installed on the system.

If the package is not installed, it must be installed to use the protocol.

4. Make sure that the desired protocol for the card rate is supported.
5. Install the required package.

If the reason is Boards in D-channel group <group number> are not contiguous, the cards in the PRI D-channel group must be made contiguous. Contact your Avaya support representative for assistance.

� 2002 Avaya Inc. All Rights Reserved.