|
|
|
|
|
The assign card command assigns a group number to a card.
The assign channel command assigns a group number to a channel.
Synopsis
assign card card to [eqpgrp] group_number [grpname]
assign channel number to [eqpgrp] group_number [grpname]
Description
Use the assign card/channel command when a system is installed, the number of channels or cards changes, scripts are added or deleted, telephone numbers change, or when you want to reconfigure the system. The system uses the card and channel assignments to route an incoming call to the group.
Parameters for the assign card/channel command are:
Parameter |
Description |
number |
Channel number (a single card or channel number, a range of card or channel numbers specified in the format m-n, or all for all card or channel numbers) |
eqpgrp |
The eqpgrp when assigning to an equipment group |
group_number |
Number of the equipment group or service group |
grpname |
An optional character string that can be associated with grp |
Note:
If you refer to a nonexistent channel or nonexistent group in this command, the command fails.
Example
The following example shows a command that assigns channels 0 through 47 to equipment group 1.
assign chan 0-47 to eqpgrp 1
See also
