Avaya Logo

Previous Topic

Next Topic

Book Contents

Book Index

Installing the modem

The Avaya IR system contains an external modem, the U.S. Robotics Sportster 33.6 Kb faxmodem. This modem is used for remote maintenance and administration functions.

To install the modem:

  1. Verify that the modem power is off.
  2. Connect provided adapters to the modem cable.
  3. Connect the 9-pin connector to the Sun Blade 150 modem port, and connect the 29-pin connector to the modem.
  4. Verify that the DIP switch, which is on the rear of the modem chassis, has the following settings:

    5. Switch

    1

    2

    3

    4

    5

    6

    7

    8

    Setting

    Up

    Up

    Down

    Down

    Up

    Up

    Up

    Down

    If necessary, set the switches.

  5. Turn on the modem.

The modem will initialize when the Avaya IR system boots up.

See also

� 2002 Avaya Inc. All Rights Reserved.