|
|
|
|
|
The modem is automatically configured by a script that runs at startup.
The following commands are run by the script:
Command |
Description |
set ProductID product_id |
Sets the product ID. |
set AlarmDest telno |
Sets the telephone number (telno) to INADS alarming. |
set Alarming [on | off] |
Turns dial-out alarming on or off. |
send Test Alarm |
Sends a test alarm to INADS. |
set-ppp-options tsc_ppp local_IP remote_ID |
Sets up PPP for login account tsc_ppp. |
Note:
If you want to modify the configuration after installation, you can use the Web Administration interface.
