This section includes steps for the following processes:
Install the Communication Manager server
Refer to the Communication Manager documentation for more information about Communication Manager server installation, see S8300 installation and upgrades documentation, or S8400 installation and upgrades documentation.
You can obtain copies of these documents from the Product Documentation website accessible
at avaya.com/support or from the CD-ROM, Documentation for Avaya Communication Manager, Media Gateways and Servers.
|
NOTE: The Communication Manager server that
supports the IA 770 INTUITY AUDIX messaging is always
a primary controller, never a local spare processor. |
Tasks that should be completed prior to continuing with the IA 770
INTUITY AUDIX Messaging installation are as follows:
- Check your planning forms for the most recent IA770 INTUITY AUDIX
remote field updates (RFUs). Remote field update packages have the
format A<number>rf+<letter>.rpm
or C<number>rf+<letter>.rpm
(for example, C6037rf+a.rpm). You should download any INTUITY
AUDIX RFUs to your laptop the same way you download Communication Manager software.
The INTUITY AUDIX RFUs are available from the Software Download section
of the http://www.avaya.com/support website on the Internet.
- Create and obtain license and authentication
files. The license file should contain permissions for INTUITY AUDIX
software as well as Communication Manager server capabilities.
- Install hardware.
- Load and install license and authentication files.
- Load and install most recent Communication Manager software. The
Communication Manager server software (the .tar file) also contains INTUITY AUDIX software,
though INTUITY AUDIX software cannot be installed and used unless
the license file contains the right permissions.
- Configure the media gateway.
- Load and install most recent media gateway/Communication Manager server firmware.
- Administer Communication Manager Software.
- Add INADS phone numbers and enable alarms.
- Back up the system.
RFUs and Additional Announcement Sets
for IA 770 INTUITY AUDIX Messaging
|
Note: This task
is necessary only if the customer requests additional languages
or IA770 INTUITY AUDIX remote field updates are required. |
The language packages, also called announcement sets, allow system
users to hear voice prompts and system announcements in other languages.
The system is shipped from the factory with the following language packages
installed:
- US English
- English TDD (for teletype (TTY) machines)
Use the IA 770 INTUITY AUDIX Languages CD to upload additional announcement
sets. For an IA770 INTUITY AUDIX RFU, the file will be in the directory
to which you downloaded the RFU.
Top of page
If you are adding an IA 770 INTUITY AUDIX Messaging Application
to an existing 