Have remote test subscribers send messages to your local test
subscribers during acceptance testing. You need to retrieve the messages
to verify that your local machine is administered correctly with the remote
machines and is receiving messages correctly. When you retrieve the messages,
you should hear the system say the name of the remote machine and the
remote test subscriber, if you recorded a name for the remote machine
and the remote test subscriber.
After you receive messages from the remote machines,
contact each of the remote machine network administrators and inform
each one that you received a message from their machine.
To retrieve messages from the test
remote subscribers:
- Dial the INTUITY
AUDIX voice messaging extension. This is the extension subscribers
call to retrieve and send messages.
- When prompted to
enter an extension, use the telephone keypad to enter a local test
subscriber extension followed by #.
- Enter the password
for the local test subscriber followed by #.
You hear the subscriber's
name and a message telling you the number of messages in your mailbox,
if any. Avaya INTUITY then plays the activity menu.
- Press 2 to retrieve
messages.
Avaya INTUITY plays the
header for the first message. The header includes the name or extension
of the sender and the date and time the message was received.
- Press 0 to listen
to the message.
- As you listen to
the message, note the remote machines and remote test subscribers
that were able to exchange messages with you.
At the end of the message,
you hear the following prompt:
"To respond or forward,
press one. To delete, press star d. To skip, press pound."
- Press * 3 (which
is the same as * D) to delete the message.
- Repeat Step 4
through Step 7 for each message in the local test subscriber's mailbox.
- When you finish
retrieving messages from remote test subscribers, hang up the telephone
and then contact the remote machine network administrators and inform
them that you received a message from their machine.
