VMSC - VMD - PBX Configuration - General Tab (IP SIP)

Use the PBX Configuration dialog box, General tab to configure the PBX Dual Tone Multi-Frequency (DTMF) dialing tones.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the IP SIP PBX. The system displays the PBX Configuration dialog box for the selected voice mail domain, with the General tab active.

Configuring the Screen Controls

PBX Name Enter a descriptive name for the PBX. The PBX name appears in the Voice Mail System Configuration (VMSC) tree after you close the PBX Configuration dialog box, and allows you to differentiate between switches of the same type. If you do not enter a name for the PBX, the default name appears in the VMSC tree.

DTMF Inter-Digit Delay during Dialing (ms) Enter the duration, in milliseconds, between DTMF tones when dialing. The range is 10 through 999, and the default is 80.

DTMF Length during Dialing (ms) Enter the duration, in milliseconds, of a DTMF tone when dialing. The range is 10 through 999, and the default is 80.

DTMF Length during Detection (ms) Enter the length, in milliseconds, of a DTMF tone during detection. The range is 1 through 999, and the default is 50.