Call-Handling Display Mode        

The display remains in Call-Handling Mode until you activate one of the other display or softkey features. Press the button after using any of those features to return to Call-Handling Display Mode, unless specifically directed otherwise.

Upper Display Line

The Time and Date appear on the upper display line when the phone is idle. Time and date are set at the switch, so if there is an error, contact your Telephone System Administrator.

When plugging in your 4612 IP Telephone for the first time, or after a power outage, it may take several minutes for the time and date to appear on the display screen.

Lower Display Line

Line/Feature Button Information 

The 4612 IP Telephone has 12 Line/Feature buttons (also called call appearance buttons). Beginning with the first button in the upper left corner of the faceplate, and going down, the lower display line identifies the buttons as follows:

• Left column: a through f
• Right column: g through l

When the display shows a=, it represents call information for the first Line/Feature button. The next button down would be shown as b=, and so on.

Call Information 

When you dial an extension, that number shows on the lower display line and is then replaced by the called party's name and extension. When someone on another extension calls you, the display shows the caller's name. Outside calls show the telephone number, the words OUTSIDE CALL or a trunk identifier.

 

Using the Display And Softkeys
Menu (Softkey) Display Mode
Test