Timer                                  

The Timer (display) feature lets you measure elapsed time. 

To see elapsed time (hours, minutes, seconds)

1. Press  , then press the softkey below Timer,

or

If Timer is not available on your display, press the button your System Administrator has programmed for the Timer feature.

The elapsed time displays.

2. To stop the Timer and clear the display, press , then press the softkey below Timer again,

   or

   If Timer is not available on your display, press the button your System Administrator has programmed for the Timer feature again.

   The time elapsed since initiating the Timer displays for about three seconds, then disappears.

 

Menu (Softkey) Display Mode