alarm-absolute disable ping

Disables absolute alarms for Ping tests on any cell or edge that is assigned this alarm template.

You can control the generation of absolute alarms for each measurement variable individually or all measurements collectively.

Syntax

alarm-absolute disable ping (all | rtt | loss | inter-arrival-time)

no alarm-absolute disable ping

no alarm-absolute disable ping (all | rtt | loss | inter-arrival-time)

Arguments

Table 5: alarm-absolute disable ping arguments
Argument	Description
all	Disables absolute alarms for all Ping measurements: RTT, loss, and inter-arrival-time.
rtt	Disables absolute alarms for Ping round trip time (RTT).
loss	Disables absolute alarms for Ping loss. The loss threshold is a percentage of packets lost in transit.
inter-arrival-time	Disables absolute alarms for Ping inter-arrival-time. Inter arrival time is the time between tests, and can be used to trigger an alarm when a link is down or a set of endpoints becomes isolated.

Prerequisites

Must be in Chatter Alarm Configuration mode. For information on how to access this mode, see Accessing and exiting command modes.

Occurrence

Use multiple times.

Default

Absolute alarms are enabled for all Ping measurements.

Description

Disables absolute alarms for Ping tests on any cell or edge that is assigned this alarm template.

You can control the generation of absolute alarms for each measurement variable individually or all measurements collectively.

The no command restores the default value of enabled for all Ping measurements or the specified measurement variable.