alarm-absolute disable tcp

Disables absolute alarms for TCP tests on any cell or edge that is assigned this alarm template.

You can control the generation of absolute alarms for each measurement variable individually or all measurements collectively.

Syntax

alarm-absolute disable tcp (all | delay | cerror | inter-arrival-time)

no alarm-absolute disable tcp

no alarm-absolute disable tcp (all | delay | cerror | inter-arrival-time)

Arguments

Table 7: alarm-absolute disable tcp arguments
Argument	Description
all	Disables absolute alarms for all TCP measurements: delay, cerror, and inter-arrival-time.
delay	Disables absolute alarms for TCP delay. Delay is how long (in milliseconds) the connection takes to complete.
cerror	Disables absolute alarms for TCP cerror. Cerror is the success or failure of the connection.
inter-arrival-time	Disables absolute alarms for TCP inter-arrival-time. Inter arrival time is the time between tests, and can be used to trigger an alarm when a link is down or a set of endpoints becomes isolated.

Prerequisites

Must be in Chatter Alarm Configuration mode. For information on how to access this mode, see Accessing and exiting command modes.

Occurrence

Available for use multiple times in the configuration.

Default

Absolute alarms are enabled for all TCP measurements.

Description

Disables absolute alarms for TCP tests on any cell or edge that is assigned this alarm template.

You can control the generation of absolute alarms for each measurement variable individually or all measurements collectively.

The no command restores the default value of enabled for all TCP measurements or the specified measurement variable.