|
|
|
Enables load optimization, which factors a link’s current usage load into the performance-route decision-making process.
load optimization {enable | disable}
no load optimization
Must be in engine configuration mode (config-engine), which requires privileged-level access.
Use once globally, or once per decision-policy block.
When load optimization is enabled, current data rates through your service provider links will be evaluated against bandwidth thresholds during the performance route selection process. (If SNMP polling is not enabled, the minimum required load samples will never be reached and load optimization will never be used. See the polling usage on command for information about SNMP polling.)
Bandwidth thresholds are set with the load threshold-table command. Load optimization requires that a load threshold table be configured.
Minimum required samples is set with the load min-required-samples command.
The no form of the command reverts to the default status.
See also the load evaluation-interval command.
|
|
|