set-alarm edge

set-alarm edge

Assigns an alarm template to a Chatter edge. Each edge can have one alarm template assigned.

Syntax

set-alarm edge <ip-address1> <ip-address2> alarm <alarm-name>

no set-alarm edge <ip-address1> <ip-address2>

Arguments

Table 35: set-alarm edge arguments
Argument	Description
<ip-address1>	IP address of the source end point.
<ip-address2>	IP address of the destination end point.
<alarm-name>	Alarm template that you are assigning to the zone.

Prerequisites

Must be in Chatter Configuration command mode. For information on how to access this mode, see Accessing and exiting command modes.

Occurrence

Available for use multiple times in the configuration. Each edge can have one alarm template assigned.

Description

Assigns an alarm template to a Chatter edge. Each edge can have one alarm template assigned.

An edge is the IP link that connects a pair of network devices, for example, routers, layer 3 switches, or Chatter end points. CNA displays Chatter edges as colored lines.

You can also assign a default set of absolute alarm settings to all zones or edges to which you have not assigned a specific alarm template.

The no command assigns the default alarm template to the edge.