Previous page Next page

show cna-agent

Displays information about the CNA test agents in your agent-based measurement network.

Syntax

show cna-agent [assigned [zone <zone-name>] | unassigned | detail | measurement [ip-address <addr>] [duration <s>]]

Arguments
Table 44:  show cna-agent  
Option or argument
Description
[assigned [zone <zone-name>]

Displays all CNA agents that are assigned to a zone. To see the CNA agents that are assigned to one specific zone, use the zone <zone-name> option.

unassigned

Displays all CNA agents that are not assigned to a zone. Use this option to see new CNA agents that you need to assign to a zone.

detail

Displays the following information for each CNA agent:

l IP address
l CNA server with which it registered
l Date and time of registration
l Version of CNA agent software
l Software version
l Type of device (whether a stand-alone CNA Agent device, or an embedded agent)
l MAC address
l Network
l Call server (for IP phones)
l Port on the CNA agent to which the CNA Server sends test requests.
l Port out which the CNA agent sends RTP test requests to a destination CNA agent.
l Hardware model
l Firmware version
measurement

Displays the following information for each CNA agent:

l IP address
l CNA server with which it registered
l Duration in seconds that the report covers
l Number of test requests sent to a destination CNA agent.
l Number of test results (ok or busy) received from a destination CNA agent
l Number of CNA server test requests to which the CNA agent sends a busy response. When busy, the CNA agent does not send test requests to destination CNA agents.
l Number of test requests received from a source CNA agent.
l Number of test results (ok or busy) sent to a source CNA agent
l Time last test request was sent to destination CNA agent.
l Time last test result was sent to source CNA agent.
[ip-address <addr>]

IP address of a CNA agent for which you want to view measurement data.

[duration <s>]

Time period in seconds for which you want to see measurement data. The default duration is 0: all available measurement data is displayed.

Prerequisites

Must be in Privileged command mode.

Description

Displays information about the CNA test agents in your agent-based measurement network.

The report lists one row per CNA agent. If an agent is assigned to a particular zone, it is indicated in the report.

Sample report
IP Address
 

Name
 

Assigned To
 

Device Type
 

148.147.3.112
 

Milpitas-TP
 

California
 

CNA Server => IBM
 

148.147.12.46
 

Basking-Ridge-TP
 

New Jersey
 

CNA Agnet => Avaya
 

12.14.16.10
 

Pune-TP
 

India
 

IP Phone
 

135.10.13.66
 

-
 

-
 

IP Phone

Previous page Next page