snmp-server

Defines the host to which Chatter sends SNMP traps or informs.

Syntax

snmp-server host <host-id> community <community-string> [udp-port <port>]

no snmp-server host <host-id>

Arguments

Table 55: snmp-server arguments
Argument	Description
<host-id>	IP address of the host to which Chatter sends SNMP traps or informs.
<community-string>	Community string to be sent with the SNMP trap or inform.
<port>	UDP port number on the host where Chatter sends SNMP traps or informs.

Prerequisites

Must be in Chatter Configuration command mode. For information on how to access this mode, see Accessing and exiting command modes.

Occurrence

Up to four SNMP server hosts can be configured for the Chatter module.

Default

No SNMP notifications are generated by Chatter unless you use this command to configure them.

Only version 1 traps are generated.

By default notifications are sent to UDP port 162.

Description

Defines the host to which Chatter sends SNMP traps.

The command specifies whether the notification is sent as a trap.

The no command disables Chatter traps or informs to the specified host.