snmp-server enable traps

snmp-server enable traps

Configures traps or informs that will be generated by CNA.

Syntax

snmp-server enable traps <family>
 
no snmp-server enable traps [ <family> ]

Arguments

family--trap family to be enabled/disabled; can be one of the following:

ifmib
v2mib
pcmib
pcmib-verbose
outage

Prerequisites

Must be in configuration (config) mode, which requires privileged-level access.

Occurrence

Available for use multiple times in the configuration.

Default

All trap families are enabled by default.

Description

The snmp-server enable traps command works in conjunction with the snmp-server host command to configure SNMP traps and informs.

See the snmp-server host command for details and a list of traps within each family.

See also the snmp-server informs command.

The no form of the command disables the specified trap generated by CNA. If you use the no form without a family argument, all traps will be disabled.