clear active-measurements

Clears some or all statistical data from the master table of active measurement statistics maintained by the RSOS software.

clear active-measurements [ [ group <name>] | no-group]
 
                          [ target <probe> ]
 
                          [ address <addr> ]
 
                          [ range-address <range> ]
 
                          [ type { tcp | icmp | traceprobe } ]
 
                          [ ustat <uname> ]
 
                          [ successful ]
 
                          [ errors <list> ]
 
                          [ probing <address> ]
 
                          [ range-probing <range> ]
 
                          [ prefix <prefix> ]
 
                          [ prefix-probing <prefix> ]
 

• name--name of an active measurement group
• probe--IP address or domain name of an active measurement probe, as entered in the configuration
• addr--IP address of probe, as resolved by DNS
• range--range in CIDR format (a.b.c.d /n)
• uname--USTAT module name
• list--error codes; can be any combination of the following:
• d--DNS
• h--Host unreachable
• n--Network unreachable
• p--Port unreachable
• q--Queue drop
• t--Probe timeout
• o--Other
• prefix--prefix address, in CIDR notation (a.b.c.d /n)
• prefix-probing--prefix address, in CIDR notation (a.b.c.d /n)

System operations mode, with privileged-level access.

The clear active-measurements command manages the tables displayed by the show active-measurements command.

CNA maintains a table of statistics for all currently configured active probes. When you execute the show active-measurements command, CNA locates and displays all rows of the master table that match the specified arguments.

Use the clear active-measurements command to clear selected rows in the master table.

Use the range-address keyword to clear addresses within a desired range.

Use the range-probing keyword to clear addresses within a desired traceprobing range.

Use the no-group keyword to clear data for all active measurements that are not associated with a group.

To clear data for all active measurements, do not specify either a group name or the no-group keyword.