|
|
|
In system-operations mode, cancels privileged-level access (requires enable password to resume).
In an active-measurement group configuration block, suspends active probing for all targets in the group.
In a Check Point configuration block, suspends polling of the Check Point management system.
disable no disable
Requires privileged-level access.
To suspend active probing, must be in active-measurement group configuration mode (config-engine-active).
Use once per active-measurement group or Check Point configuration block.
If you execute the disable command at a privileged-level access prompt (not in config mode), privileged-level access will be cancelled. The enable password will be required to resume privileged-level access.
When the disable command is entered within an active-measurement group configuration block, active probing of all targets in the group is suspended. The active-measurement group configuration block remains in the configuration, and all targets remain defined, but no probes are conducted.
Disabled groups will be listed in the output of the show statistics command executed with the am-scheduler process.
When the disable command is enter within a Check Point configuration block, VPN polling is suspended.
Use the no form of the command to remove the disable command from the configuration block, thereby enabling the probes.
See the active-measurement group command for more information about configuring active measurement groups.
|
|
|