Removing a CNA agent from a zone
To remove a CNA agent from a zone:
- Access Chatter Zone Configuration mode. To access this mode, enter the following commands:
a.
enable (Privileged mode)
b.
configure terminal (Configuration mode)
c.
module chatter (Chatter Configuration mode)
d.
zone <name> define (Chatter Zone Configuration mode)
- Enter the following command:
no cna-agent <ip-address>
where <ip-address> is the IP address of the CNA agent that you are removing.
For more information on this command, see cna-agent in the CNA Command Reference Guide.
