How do I set the dip switch for duplicated systems?

DEFINITY Made Easy Tools
Issue 3, December 2001

Frequently Asked Questions

How do I set the dip switch for duplicated systems?

Answer

For an R7/R8 upgrade, you replace the old TN772 duplication board with the new TN792 duplication board, which has a 3-position switch located on its face. Verify that the switch is in the AUTO (central) position on both boards so the 2 processors can talk to each other.

(To lock the A SPE on line, put the switches on both boards to the A position; to lock the B SPE on line, put the switches on both boards to the B position.)

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.