How do I set the dip switch for duplicated systems?

DEFINITY Made Easy Tools
Issue 2, November 2000

Frequently Asked Questions

How do I set the dip switch for duplicated systems?

Answer

For an R7/R8 upgrade, you replace the old TN772 duplication board with the new TN792 duplication board, which has a 3-position switch located on its face. Verify that the switch is in the AUTO (central) position on both boards so the 2 processors can talk to each other.

(To lock the A SPE on line, put the switches on both boards to the A position; to lock the B SPE on line, put the switches on both boards to the B position.)

Always check at The Made Easy Web site for the most current information.

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.