Changing Class of Service Options

Use the COS screen to define each Class of Service. Use the Subscriber screen to assign a COS to a subscriber.

Things to Consider About Changing Class of Service Options

 

Effect of changes	When you change a Class of Service, that change affects all subscribers to whom you have assigned that Class of Service. For example, if you change the Incoming Mailbox Order field from fifo to lifo for the Class of Service named class8, the order of messages in the incoming mailbox changes for all subscribers with class8 identified on their Subscriber screen.
Custom COS	After you assign a COS for a subscriber on Page 1 of the Subscriber screen, the specific options for that Class of Service appear on Page 2 of the Subscriber screen (shown in Subscriber Class of Service Parameters screen, Page 2). You can then further customize the subscriber's COS options by changing them on Page 2.
Printing screen information	If you would like to keep a paper copy of the screen contents, precede the command display with the command print. A printed copy could be helpful, especially if you create several custom COSs. Note: You must have a system printer available and enabled to print screens and reports. If you send print job requests and have no printer available, the print jobs stay in the print queue, taking up required system space.

Making Changes to a Class of Service

To change a COS:

1. Start at the Administration main menu and select:

Global Administration
     Messaging Administration

The system displays the AUDIX Command Prompt screen.

You can display a list of the current Classes of Service if you are not sure of the name of the COS you want to edit.

2. At the enter command: prompt, enter change COS COS-number/COS-name, where COS-number/COS-name is the unique COS number (0–11) or COS name you want to administer.

The system displays the Class of Service screen, Page 1.

3. Complete the fields on this screen using the information provided in the table Field Definitions: Class of Service screen, Page 1.
4. Press F7 (NextPage).

The system displays the Class of Service screen, Page 2.

5. Complete the fields on this screen by using the information provided in the table Field Definitions: Class of Service screen, Page 2.
6. Press F3 (Enter) to save this information to the system database.

The cursor returns to the command line, and the system displays the following message:

Command Successfully Completed

7. Enter another administrative command at the enter command: prompt or click Return to Main.

Top of page