Table: Migration Log File Error Codes
| Code |
Description |
| 0 |
Done; the data is okay |
| 4 |
Bad data |
| 5 |
Invalid entry |
| 6 |
Bad data; data is out of range |
| 9 |
Hardware device busy |
| 10 |
You cannot change from n to y using this form |
| 12 |
System error |
| 13 |
Maintenance port busy |
| 14 |
Invalid input |
| 15 |
Hardware unit not configured |
| 16 |
Unmatched volume label |
| 17 |
Announcement set already exists |
| 18 |
Invalid hardware unit |
| 19 |
A number out of range |
| 20 |
Tape and system's machine name and software release numbers do not match |
| 21 |
Tape and system's software release numbers do not match |
| 22 |
Tape and system's machine names do not match |
| 23 |
System is in a shutdown state |
| 24 |
Operation aborted |
| 25 |
Partial subscriber name is not unique |
| 26 |
"Remote Subscriber Specified" |
| 27 |
"No Subscriber Administered for this Extension" |
| 28 |
Call back number exceeds 15 digits |
| 29 |
Country code of 0 is not valid |
| 30 |
The specified address is not a voice port |
| 31 |
Voice group is currently busy |
| 32 |
System error = default AE code |
| 33 |
Old password must be entered |
| 34 |
Bad volume name |
| 35
|
Volume name already exists |
| 36
|
Hardware unit is unequipped |
| 37
|
Hardware unit fault |
| 38
|
Data is unavailable — check back later |
| 39
|
Cannot decrease file system size |
| 40
|
Not a valid field for delete |
| 41
|
Up to 5 digits are valid per extension |
| 42
|
Duplicate extension — already in use |
| 43
|
Duplicate touchtone — already in use |
| 44
|
Invalid extension length |
| 45
|
Extension range limit exceeded |
| 46
|
Value exceeds system limits |
| 47
|
Enter a value in this field |
| 48
|
Previous copy still in progress |
| 49
|
No more subscriber IDs available |
| 50
|
Logical copy to nonexisting file system not allowed |
| 51
|
File system in use — admin shutdown required |
| 52
|
Volume does not exist |
| 53
|
File system does not exist |
| 54
|
Already exists |
| 55
|
Does not exist |
| 56
|
Local machine cannot be removed |
| 57
|
Duplicate name — already in use |
| 58
|
Illegal machine type |
| 59
|
File system in use |
| 60
|
Too many digits entered |
| 61
|
Too few digits entered |
| 62
|
Call transfer out of AUDIX feature not active |
| 63
|
System covering extension not assigned |
| 64
|
Enhanced transfer set to not active |
| 65
|
Invalid hour entered on traffic report form |
| 66 |
Invalid date entered on traffic report form |
| 67 |
Subscriber activity in progress; try remove later |
| 68 |
Feature not enabled. For example, outcalling on IMAPI = y but outcalling is not active. |
| 72 |
"Command Initiated" use "Status Tape" to check the progress. |
| 73 |
Address range allocation exceeded |
| 74 |
Status command completed |
| 75 |
Machine name already exists |
| 76 |
Machine does not exist. (Use double quotes if name includes spaces.) |
| 77 |
Machine name does not exist |
| 78 |
Not enough characters in password |
| 79 |
No partial overlaps permitted |
| 80 |
Message transmission schedule exceeds 24 hours |
| 81 |
Use "new machine name" field |
| 82 |
Entry must contain at least one non-digit |
| 83 |
Administered/nonadministered subscriber threshold reached |
| 84 |
Too many machine names specified |
| 85 |
Duplicate node |
| 86 |
Last node in node list — cannot remove |
| 87 |
Cannot change node for unknown subscriber |
| 88 |
Copy Initiated |
| 89 |
Remove Initiated |
| 90 |
Switch number not administered — field must be blank |
| 91 |
To confirm, enter y |
| 92 |
Number of network machines exceeds maximum limit. |
| 93 |
Local machine name specified |
| 94 |
Local subscriber name specified |
| 95 |
File system not mounted |
| 96 |
Only ACTIVE file system fragments may be cached |
| 97 |
Only the ADMIN file system can be modified |
| 98 |
Audit or backup in progress |
| 99
|
Invalid extension for this node |
| 100
|
Operation confirmed application error code |
| 101
|
Invalid fragment ID entered |
| 102
|
Too many actions requested |
| 103
|
Remote update failed |
| 104
|
File system being mirrored or already mirrored |
| 105
|
Invalid password |
| 106
|
File system mirroring in progress, try later |
| 107
|
Master and slave cannot be on same disk |
| 108
|
Cannot increase slave size; increase master instead |
| 109
|
Invalid number of digits in field |
| 110
|
Invalid test selected for current switch * connection type |
| 111
|
Too many message waiting ports specified |
| 112
|
File system name is too big (file system name.type must be less than 16 characters |
| 113
|
Address ranges on system |
| 114
|
Broadcast mailbox cannot change COS |
| 115
|
Broadcast mailbox permissions type must be "none" |
| 116
|
Name exists for AUDIX or text service machine. |
| 117
|
Duplicate local or remote extension in use |
| 118
|
Incorrect record length read |
| 119
|
EOF reached without finding a record |
| 120
|
Disk init selected; enter y to confirm |
| 121
|
Invalid Automated Attendant Transfer Treatment |
| 122
|
Port not available for use |
| 123
|
Fragment zero cannot be removed |
| 124
|
Transfer subscriber does not have call answer permissions but no automated attendant extension |
| 125
|
Ports 30 through 32 refer to VPT 5 |
| 126
|
No audit status available |
| 127
|
No VPT 2 assigned |
| 131
|
Bad class of service name or number |
| 132
|
Not unique class of service name |
| 133
|
Cannot change file system type |
| 134
|
Cannot increase file system size |
| 135
|
File system already mounted — diff mt pt |
| 136
|
Conflicting new class of service name |
| 137
|
Illegal extension (add subscriber command line) |
| 138
|
Confirm turning off CDR (ch sys cdr) |
| 139
|
Cannot decrease CDR buffer size (ch sys cdr) |
| 140
|
No test to reattach to (status test) |
| 141
|
Must wait for previous test to complete |
| 142
|
New Password and Confirm Password fields do not match
|
| 143
|
Invalid fragment |
| 144
|
Fragment does not exist |
| 145
|
Announcement set does not exist |
| 146
|
Insufficient space in file system |
| 147
|
Invalid announcement set |
| 148
|
Not a touchtone-unique announcement set |
| 149
|
Active announcement set cannot be removed |
| 150
|
Invalid announcement ID |
| 151
|
Announcement does not exist |
| 152
|
Cannot copy into active announcement set |
| 153
|
Admin announcement set not defined |
| 154
|
Permission denied |
| 155
|
Cannot do a synchronization with the switch in OAM state |
| 156
|
Invalid switch type for time sync. with switch |
| 157
|
Device is write-protected |
| 158
|
Confirm tape erasure |
| 159
|
Confirm possible disk data erasure |
| 160
|
Tape drive not ready — check cartridge |
| 161
|
Tape access disable — check alarms |
| 162
|
Tape not administered |
| 163
|
Cannot write to tape — volume type must be "backup" |
| 164
|
Restore failed — check admin/error logs |
| 165
|
DATEMSK env var. is not set |
| 166
|
Template file cannot be open for reading |
| 167
|
Failed to get file status information |
| 168
|
The template is not a regular file |
| 169
|
Error reading template file |
| 170
|
Malloc failed (not enough memory) |
| 171
|
No line in template file matches input |
| 172
|
Already administered |
| 173
|
Time sync. failed |
| 174
|
Duplicate location — already in use |
| 175
|
Day must be between 0 and 31 |
| 176
|
Year must be greater than 1989 |
| 177
|
Minutes must be between 0 and 59 |
| 178
|
Hour must be between 0 and 23 |
| 179
|
"Turning off this feature will delete many user greetings. Press enter to confirm?" |
| 180
|
Must wait for previous audit to complete |
| 181
|
Provisioned ports is less than ports administered |
| 182
|
Switch connection type must be `Embedded' |
| 183
|
You cannot administer more ports than you have purchased |
| 184
|
You must supply a valid resource type |
| 185
|
Choose either Active or Resolved alarms |
| 186
|
Missing Major, Minor and/or Warning selection |
| 187
|
Machine name is not unique |
| 188
|
Machine type is invalid |
| 189
|
Command not valid for amisac machine |
| 190
|
Activity Log will be cleared. Press enter to confirm, cancel to cancel. |
| 191
|
System initializing, please try later |
| 192
|
System will be automatically restarted |
| 193
|
Link log will be cleared |
| 194
|
Invalid switch number |
| 195
|
Host switch must be administered |
| 196
|
Customer or old password incorrect |
| 197
|
Cannot assign guest password to subscriber |
| 198
|
Number of subscribers exceed sys limits |
| 230
|
Baud rate valid for synchronous only |
| 231
|
Duplicate baud rate |
| 232
|
Board must be busied out first |
| 233
|
Transfer type invalid for configuration |
| 234
|
Full update in progress |
| 235
|
Remote subscriber limit hit |
| 236
|
No remote subscriber IDs |
| 237
|
Update from this machine not allowed |
| 1000
|
Not owner of resource |
| 1001
|
Too many actions requested |
| 1002
|
Operation halted |
| 1003
|
Enhanced transfer not active |
| 1004
|
Audit had to do a fix |
| 1005
|
Resource allocation failure |
| 1006
|
At end of message |
| 1007
|
At start of the message |
| 1008
|
Another audit already in progress |
| 1009
|
Bad announcement |
| 1010
|
Bad checksum |
| 1011
|
Bad file format |
| 1012
|
Invalid fragment ID entered |
| 1013
|
No record with desired key is found |
| 1014
|
List to be added does not exist |
| 1015
|
Bad master file system |
| 1016
|
Both master and slave file systems have errors |
| 1017
|
Invalid port |
| 1018
|
Incorrect record length read |
| 1019
|
Conflicting start operation already in progress |
| 1020
|
Bad slave file system |
| 1021
|
The subscriber does not exist |
| 1022
|
Bad server |
| 1023
|
Value out of range |
| 1024
|
Invalid transaction ID |
| 1025
|
Label does not match disk label |
| 1026
|
Unassigned data link |
| 1027
|
Background timeout |
| 1028
|
Write/read buffer ID illegal |
| 1029
|
Illegal xact-lock # |
| 1030
|
Only active file system fragments may be cached |
| 1031
|
Invalid configuration |
| 1032
|
Command invalid in current state |
| 1033
|
Invalid command length |
| 1034
|
Error code for invalid community ID |
| 1035
|
Controller not configured |
| 1036
|
Device or controller not configured ** |
| 1037
|
Press delete again for confirmation |
| 1038
|
System is in a conflicting state |
| 1039
|
Invalid date |
| 1040
|
Resource deallocation failure |
| 1041
|
Cannot delete ACTIVE or ADMIN versions |
| 1042
|
Covering extension is invalid |
| 1043
|
Dial denied |
| 1044
|
Data is unavailable — check back later |
| 1045
|
Duplicate extension — already in use |
| 1046
|
Duplicate alias exist |
| 1047
|
Duplicate subscriber name — already in use |
| 1048
|
Duplicate node name |
| 1049
|
Duplicate range — already in use |
| 1050
|
Duplicate touchtone equivalent — already in use |
| 1051
|
Duplicate disk label on system |
| 1052
|
Empty |
| 1053
|
Enhanced transfer set to not active |
| 1054
|
Enter a value in this field |
| 1055
|
Invalid extension length |
| 1056
|
Too few digits entered |
| 1057
|
Invalid flag value |
| 1058
|
No such file name |
| 1059
|
Field name too long |
| 1060
|
Field not empty |
| 1061
|
Wrong file organization |
| 1062
|
File system name is too big |
| 1063
|
Help request |
| 1064
|
Invalid hour |
| 1065
|
Hardware unit not configured |
| 1066
|
Invalid hardware unit |
| 1067
|
Hangup |
| 1068
|
Hardware error |
| 1069
|
Invalid code |
| 1070
|
Invalid system ID |
| 1071
|
Invalid end of file setting |
| 1072
|
Invalid extension for this node |
| 1073
|
Invalid access code |
| 1074
|
Announcement version not active |
| 1075
|
Incompatible data |
| 1076
|
Inconclusive result from Mtce Activity |
| 1077
|
Disk initialization selected; enter y to confirm |
| 1078
|
Invalid number of digits |
| 1079
|
Invalid file system for mirroring |
| 1080
|
File system being mirrored or already mirrored |
| 1081
|
Data mirroring initiation in progress |
| 1082
|
Incorrect length on address ranges |
| 1083
|
Invalid initialization for RS232 modem |
| 1084
|
Invalid input |
| 1085
|
Invalid message |
| 1086
|
Invalid session ID |
| 1087
|
Invalid test for current switch connection type |
| 1088
|
Invalid vintage |
| 1089
|
Key already exists or attempt to write on pristine file |
| 1090
|
Bad key length |
| 1091
|
Extension range exceeds limit |
| 1092
|
Length of message slot out of range |
| 1093
|
Data link not maintenance busy for testing |
| 1094
|
Link error |
| 1095
|
Multiple tests of data link interface not allowed |
| 1096
|
Local machine name specified |
| 1097
|
Too many digits entered |
| 1098
|
Request rejected |
| 1099
|
Recorded maximum allowed |
| 1100
|
Invalid message body ID |
| 1101
|
Too many devices |
| 1102
|
Machine name exists |
| 1103
|
Invalid mode |
| 1104
|
Another call is necessary |
| 1105
|
File system mounted |
| 1106
|
Maximum rescheduling attempts reached |
| 1107
|
No such alias exists |
| 1108
|
Boot file system does not exist |
| 1109
|
No call in progress using specified device |
| 1110
|
Invalid channel |
| 1111
|
Invalid class of service |
| 1112
|
Copy from active boot file system not allowed |
| 1113
|
Not an enterable field |
| 1114
|
The object does not exist |
| 1115
|
No such field index |
| 1116
|
Distribution list does not exist |
| 1117
|
No file system mounted |
| 1118
|
No message found |
| 1119
|
Number of message slots out of range |
| 1120
|
Number of network channels out of range |
| 1121
|
No loop current after off-hook |
| 1122
|
No carrier |
| 1123
|
No status information to retrieve |
| 1124
|
Cannot decrease file system size |
| 1125
|
Not a valid field for delete |
| 1126
|
No dial |
| 1127
|
Loop current detected after on-hook |
| 1128
|
Not duplicated |
| 1129
|
File system does not exist |
| 1130
|
Audit error but not allowed to fix it |
| 1131
|
Flash hook for transfer failed |
| 1132
|
No locks |
| 1134
|
Logical copy to nonexisting file system not allowed |
| 1135
|
Measurements not turned on |
| 1136
|
Modem looparound test not available. |
| 1137
|
No more objects |
| 1138
|
Last node in node list; cannot remove it |
| 1139
|
Physical copy to existing file system not allowed |
| 1140
|
Outpulse for transfer failed |
| 1141
|
No more records |
| 1142
|
Cannot supply requested resource |
| 1143
|
No ringing |
| 1144
|
RS232 ports unavailable |
| 1145
|
No available space or resource |
| 1146
|
No port translation for requested port |
| 1147
|
Message not scheduled |
| 1148
|
Volume does not exist |
| 1149
|
No tasks waiting on event |
| 1150
|
System covering extension not assigned |
| 1151
|
Call transfer out of AUDIX feature not active |
| 1152
|
Null primary key illegal |
| 1153
|
Wrong number of primary keys |
| 1154
|
Space not previously reserved |
| 1155
|
Thresholds appear out of order |
| 1156
|
File system in use — admin shutdown required |
| 1157
|
Not same record as in file |
| 1158
|
No such table |
| 1159
|
No volume |
| 1160
|
No more entries left in xfile |
| 1161
|
End of audit |
| 1162
|
Old password must be entered |
| 1163
|
No more messages |
| 1164
|
Invalid command opcode |
| 1165
|
Unit or device being equipped out of order |
| 1166
|
More than MAX_NPORTS incoming NET manager files |
| 1167
|
Warning, overlapping ranges |
| 1168
|
Invalid password |
| 1169
|
Port number is out of range |
| 1170
|
No partial overlaps permitted |
| 1171
|
Invalid procedure ID |
| 1172
|
Data link read operation failure |
| 1173
|
Reset returned nonzero status bits |
| 1174
|
Resume returned nonzero status bits |
| 1175
|
Field only relevant for local machines |
| 1176
|
Ring — no answer |
| 1177
|
Message transmission schedule exceeds 24 hours |
| 1178
|
Duplicate local or remote extension in use |
| 1179
|
Use new ext field to change subscriber ext |
| 1180
|
Request rejected |
| 1181
|
Slot in use |
| 1182
|
Use new name field to change subscriber name |
| 1183
|
Invalid speed value specified |
| 1184
|
At first message, cannot rewind |
| 1185
|
Invalid device state transition |
| 1186
|
Dialed through an announcement |
| 1187
|
Local subscriber name specified |
| 1188
|
Master and slave file systems cannot be on same disk |
| 1189
|
Invalid switch — check system |
| 1190
|
System error |
| 1191
|
Value exceeds system limits |
| 1192
|
System error on system |
| 1193
|
Covering extension not verified |
| 1194
|
Total size of mailbox out of range |
| 1195
|
Table not open |
| 1196
|
Test failed |
| 1197
|
Timeout occurred |
| 1198
|
Timer error |
| 1199
|
Length or value too big |
| 1200
|
Argument is too long |
| 1201
|
Too many message waiting ports specified |
| 1202
|
No room for another table |
| 1203
|
Two hold delivery requests for same session |
| 1204
|
Unequipped position |
| 1205
|
Unknown logical board number |
| 1206
|
Unknown logical board type |
| 1207
|
Unoccupied entry in btree table |
| 1208
|
Filesystem in use |
| 1209
|
User ID invalid |
| 1210
|
Voice activity halted by Voice Buffer |
| 1211
|
Incompatible version |
| 1212
|
Invalid volume name |
| 1213
|
Unmatched volume label |
| 1214
|
Data link write operation failure |
| 1215
|
Automated attendant group assigned, but no automated attendant
extension |
| 1216
|
Port not available for use |
| 1217
|
CDR confirmation |
| 1218
|
CDR exists |
| 1219
|
Cannot decrease records |
| 1220
|
Cannot change adjunct mactype |
| 1221
|
Not a subscriber |
| 1222
|
No reusable subscriber ID |
| 1223
|
Name already in use |
| 1224
|
Not owner of resource |
| 1225
|
Tone interrupt (VB driver) |
| 1226
|
Halt interrupt (VB driver) |
| 1227
|
Pause interrupt (VB driver) |
| 1228
|
Audit found uncorrectable problem |
| 1229
|
No voice connection exists |
| 1230
|
Operation failed |
| 1231
|
Remote subscriber — limit |
| 1232
|
Remote subscriber — no subscriber ID |
