Changing Remote User Data Manually

Running a remote update can use one of your networking ports for quite some time. If you want to change a remote user immediately but do not want to run a remote update, you can change that user manually.

 

To change a remote user's data manually:

1. Start at the Messaging Administration main menu and select Messaging.

   Enter your login.The system then displays the AUDIX Command Prompt screen.

2. Enter change remote-subscriber remote_user_extension at the enter command: prompt, where remote_user_extension is the extension of a user on the remote networked system.


 

Tip: To see a list of remote systems, use the list machines command as described in Viewing a List of Machines.

The system displays the Remote Subscriber screen.

3. Complete or change the fields on this screen by using the information provided in the table for Field Definitions: Remote Subscriber screen.

4. Press F3 (Enter) to save the information in the system database.

The cursor returns to the command line, and the system displays the following message:

Command Successfully Completed.

5. Repeat Step 2 through Step 4 for each remote user that you need to update.

6. Enter exit or another administrative command at the enter command: prompt.

Top of page