Have remote test subscribers send messages to your local test
subscribers during acceptance testing. You need to retrieve the messages
to verify that your local machine is administered correctly with the remote
machines and is receiving messages correctly. When you retrieve the messages,
you should hear the system say the name of the remote machine and the
remote test subscriber, if you recorded a name for the remote machine
and the remote test subscriber.
After you receive messages from the remote machines,
contact each of the remote machine network administrators and inform each
one that you received a message from their machine.
To retrieve messages from the test remote
subscribers:
- Dial the INTUITY AUDIX
voice messaging extension. This is the extension subscribers call to retrieve
and send messages.
- When prompted to enter
an extension, use the telephone keypad to enter a local test subscriber
extension followed by #.
- Enter the password
for the local test subscriber followed by #.
You hear the subscriber's name
and a message telling you the number of messages in your mailbox, if any.
Avaya INTUITY then plays the activity menu.
- Press 2 to retrieve
messages.
Avaya INTUITY plays the header
for the first message. The header includes the name or extension of the
sender and the date and time the message was received.
- Press 0 to listen to
the message.
- As you listen to the
message, note the remote machines and remote test subscribers that were
able to exchange messages with you.
At the end of the message,
you hear the following prompt:
"To respond or forward,
press one. To delete, press star d. To skip, press pound."
- Press * 3 (which is
the same as * D) to delete the message.
- Repeat Step 4 through
Step 7 for each message in the local test subscriber's mailbox.
- When you finish retrieving
messages from remote test subscribers, hang up the telephone and then
contact the remote machine network administrators and inform them that
you received a message from their machine.
