TOC Index Search

 

The system displays the following message: 

Is a SCSI card installed on this machine? [�y�]:

  1. Enter n

    2. The system displays the following message: 

    Do you have the upgrade kit (RUK)? [ y ]:

  2. Press ENTER.

    3. The system displays the following message: 

    Install the SCSI card and attach the external disk drive according to the documentation. 

    

    

    
   
    Press enter when you are ready to shut down the system.
    

    
  
  3.  Press ENTER.
    4. 

    
   The system shuts down and then displays the following message:

    

    
   
    Press any key to reboot...
    

    

    
   
    

    

    
   
     
    

    
  
  
    
    
    
   
    
Observe proper electrostatic discharge precautions when you handle computer components. Wear an antistatic wrist strap that touches your bare skin and connect the strap cable to an earth ground. For detailed electrostatic discharge instructions, see Protecting Against ESD Damage on the Intuity Messaging Solutions Release 5 Documentation for Technicians CD-ROM, 585-313-807.

    

    
   
    


    
    		
  
    

    





    
  
  4.  Turn the power switch off.
    5. 
  
  5.  Remove the SCSI Interface Card, from the reusable upgrade kit (RUK) and then from the anti-static bag.
    6. 
  
  6.  Remove the screw retaining the slot cover from PCI slot 1, the uppermost slot within the cabinet. See MAP/5P Internal Layout. 
    7. 
  
  7.  Install the SCSI interface card in PCI slot 1. 
    8. 
  
  8.  Install and tighten the circuit card retaining screw.
     
    

    
  
  
    
    
    
   Note: 
Leave the dress cover off the system until the data transfer is verified. You can then remove the SCSI interface circuit card and replace the dress cover.

    
    		
  
    

    




    9. 

    
   

    










  

    
    
    Avaya Communication


        http://www.avaya.com

        
          Avaya UCS Information Development

    
    		
  






  

    TOC 
    Index 
Search