Replacing the MAP/5 Covers

To replace the top cover and front panel of the MAP/5:

1. Align the top cover with the unit so that the front of the top cover is about 0.5 inches from the front of the unit.
2. Lower the cover over the unit until the cover is parallel with the bottom of the unit.
3. Pull the top cover toward you until it snaps into the holding tabs that are located on either side of the front of the unit. See Top Cover Tabs.
4. Place the unit on its rear panel. The bottom of the unit needs to be facing you.
5. Align the front panel with the front of the unit and hook the top flanges of the panel underneath the top cover. See Front Panel Tabs.
6. Lower the panel until each tab snaps into position.

http://www.avaya.com Avaya UCS Information Development