Deactivating Alarm Origination

 

Note: Complete all tasks in the Preparing for the data transfer section before beginning this task. For more information, see the Upgrade Checklist on the second page of this chapter.

The Avaya Intuity system creates alarms based on events that occur during the upgrade. It might be valuable to see these alarms during the upgrade but not to send them to the Avaya Support Center. Deactivating alarm origination allows the alarms to be created but not sent.

To deactivate alarms on the old system:

1. From the Avaya Intuity Main Menu, select:

Customer/Services Administration
	Alarm Management

The system displays the Alarm Management Window.

2. Move the cursor to the Alarm Origination field, press F2 (CHOICES), and then highlight inactive.
3. Press F3 (SAVE).

The system displays the following message:

Alarm Form Update was successful
Press <Enter> to continue.

4. Press ENTER.

The system displays the Alarm Management Window.

5. Press F6 (CANCEL) until you return to the Avaya Intuity Main Menu.
6. Disconnect the INADS analog phone line.

http://www.avaya.com Avaya UCS Information Development