Checking the TCP/IP Configuration and Features on the Old System

Before the upgrade, check the TCP/IP configuration and the existing features on the older Release 5 system.

To check the old system:

1. From the Avaya Intuity Main Menu, select:

TCP/IP Administration

	Networking Addressing

2. The system displays the Networking Addressing Window.
3. Record the contents of the screen in the TCP/IP Administration Screen Contents table in the Technician's Upgrade Worksheet section.

The screen contents are used later to confirm the networking administration on the new machine.

4. Press F6 (Cancel) twice.
5. From the Intuity AUDIX Main Menu, select:

Feature Options

The system displays the Feature Options (Read Only) Screen.


 


Note: When the screen is first displayed, press the UP ARROW key to display the voice-ports line.

6. Determine the features that are currently enabled for this customer and any related quantities. Record the results in the Existing Customer Features table in the Technician's Upgrade Worksheet section.
7. Press F6 (Cancel).
8. From the Intuity AUDIX Main Menu, select:

AUDIX Administration

9. At the enter command: prompt, enter list mea feat day
10. The system displays the Feature Daily Traffic Screen.
11. Under SUBSCRIBERS, read the Local: and Remote: fields for the number of subscribers. Record the numbers in the Subscriber Totals in the Technician's Upgrade Worksheet section.

http://www.avaya.com Avaya UCS Information Development