Restarting the Old System

To restart the old system and begin the upgrade backup:

1. Turn on the power switch on the old system.
2. If the logo screen is displayed, press ESC.

On newer Intuity AUDIX systems, a logo screen appears during the startup sequence and hides the system status messages.


 


Note: As the system starts up, it might display the following error: Fixed disk 0 error It could then display the system configuration and the following message: Press F1 to continue. This message is normal. Press F1 to continue.

The system displays startup messages including the first of two console login prompts. Ignore the first console login prompt and allow the system to continue to restart. After the system has completely restarted, the second console login prompt is displayed:

Console login:

3. Continue with the next task.

http://www.avaya.com Avaya UCS Information Development